NON-DRY STAMPING OIL
A synthetic, highly fast dry evaporative forming and stamping fluid, specially developed for use on a variety of both ferrous and non-ferrous metals where a high level of part cleanliness is required. It provides the ultimate balance between lubrication and evaporation, protecting dies and punches whilst giving a virtually dry finished part. In the majority of cases parts may be powder coated or painted without resorting to time consuming parts cleaning or costly vapour degreasing.
| Metal Quest | PS-NO.40K | PS-NO.51K | PS-NO.52S | PS-NO.48 | PS-NO.153 |
|---|---|---|---|---|---|
| Appearance | Yellow | Brown | Light Yellow | Light Yellow | Yellow |
| Specific Gravity (15/4℃) |
0.88 | 0.85 | 0.81 | 0.977 | 0.971 |
| Viscosity (cst at 40℃) |
2.00 | 3.50 | 4.60 | 28.00 | 153.00 |
| Flash Point (c.o.c. ℃) |
45.00 | 50 | 48 | 195.00 | >240 |
| Copper Corrosion (100℃ * 3h) |
1a | 2c | 2a | 1a | 1a |
| Oiliness Improver | 9~20% | 9~20% | 3~9% | 3~9% | >20% |
| Chlorine | 3~9% | 3~9% | 1~3% | 3~9% | 3~9% |
| Sulphur | - | <1% | <1% | - | - |
| Special Additives | 3~9% | 1~3% | 1~3% | 1~3% | 3~9% |
| Hydrocarbon | Rest | Rest | Rest | Rest | Rest |
| Punching | t<3.0 | t<3.0 | t<2.0 | t<3.0 | |
| Application | Good for High Speed Stamping. Good for Copper Alloy. | Very good for SUS stamping in high speed. Prolong punch & die life. | Stamping oil for Steel, Carbon Steel and Stainless Steel on light duty. | Stamping Oil for SUS |
ABOUT US
The Kyowa PetroChemistry is the Asian independent manufacturer. We pride ourselves on our high quality lubricants supported by expert technical service and support.
GET IN TOUCH!
Telephone
Monday - Friday :
1700-81-5708
Business Hour :
Mon - Fri (9 am - 5 pm)
Sat (9 am - 1 pm)
Sun (Closed)
@ COPYRIGHT BY KYOWA PETROCHEMISTRY 2017