THREAD ROLLING OIL
To extend the life of the thread rolls an adequate supply of coolant must be provided. Ideally a separate flow should be directed to each thread roll, especially if coarse threads or tough materials are involved. The coolant must be free from metallic particles to avoid damage to the thread rolls.
| Product Name | MA-35 (LD) | ES-8B (LD) | NO.8 (MD) | ME-52 (HD) | ME-80 (HD) | ME-100 (HD) |
|---|---|---|---|---|---|---|
| Appearance | Yellow Transparent | Light Brown Transparent | Yellow Transparent | Amber Transparent | Yellow Transparent | Dark Brown Transparent |
| Specific Gravity (15/15 deg. C) |
0.888 | 0.928 | 0.925 | 0.9 | 0.913 | 0.882 |
| *Flash Point (C.O.C) |
>220 | 80 | 220 | >240 | 220 | 190 |
| *Kinematic Viscosity (cst at 40 deg. C) |
35 | 12 | 37 | 52 | 34.0 | 25.7 |
| *Copper Corrosion (100 deg. C* 3 hours) |
1a | 3a | 1a | 1b | 1a | 1a |
| *Fatty Acid Ester (W %) | >20% | 3-9% | >20% | >20% | >20% | >20% |
| *Chlorine (W %) | - | 3-9% | 3-9% | - | 1-3% | - |
| *Sulphur (W %) | - | 1-3% | - | <1% | - | <1% |
| *Special Additives (W %) | 3-9% | 3-9% | 9-20% | 3-9% | 1-3% | 9-20% |
| Hydrocarbon (W %) | Rest | Rest | Rest | Rest | Rest | Rest |
| Application | Thread Rolling Oil, Stamping Oil | Thread Rolling Oil, Cutting oil for Rolling Machine | Cutting oil for Autolathe machine, CNC Lathe etc | Header oil for Medium duty on Carbon Steel. Good for Thread Rolling. | Cutting Oil For SPCC & Brass Good for Thread Rolling. | For Automatic lathe work, difficult machine ferrous metals. Good for Thread Rolling |
| Item marked * is obtained by calculation. Item (LD), (MD) & (HD), are refer to Light duty, Medium duty & Heavy duty. | ||||||
ABOUT US
The Kyowa PetroChemistry is the Asian independent manufacturer. We pride ourselves on our high quality lubricants supported by expert technical service and support.
GET IN TOUCH!
Telephone
Monday - Friday :
1700-81-5708
Business Hour :
Mon - Fri (9 am - 5 pm)
Sat (9 am - 1 pm)
Sun (Closed)
@ COPYRIGHT BY KYOWA PETROCHEMISTRY 2017